Follow in the footsteps of Zhejiang acrylic manufacturers

As a Zhejiang acrylic manufacturer, we would like to take you to learn about our product.

There are many production processes. Among them, thermoforming is the process of making plexiglass plates or sheets into products of various sizes and shapes. The blanks cut to the required size are clamped on the mold frame, heated to soften, and then pressurized to make It adheres to the mould surface to obtain the same shape as the mould surface. After cooling and shaping, the edge is trimmed to obtain the product. Pressurization can be done by vacuum drawing or by directly pressurizing a convex mold with a profile. The thermoforming temperature can refer to the recommended temperature range in Table 3. When using rapid vacuum low-draft molding products, the temperature should be close to the lower limit, and the deep drawing products with complex shapes should be close to the upper limit temperature. Normally, the normal temperature should be used.

The main purpose

PMMA is the polymer obtained by the polymerization of acrylic acid and its esters, collectively referred to as acrylic resins, and the corresponding plastics are collectively referred to as polyacrylic plastics. Among them, polymethyl methacrylate is the most widely used. The abbreviation code of polymethyl methacrylate is PMMA, commonly known as plexiglass, which is by far the most excellent synthetic transparent material.

PMMA has the advantages of light weight, low price, and easy molding. Its molding methods include casting, injection molding, machining, thermoforming and so on. Especially for injection molding, it can be mass produced, the manufacturing process is simple, and the cost is low. Therefore, its application is becoming more and more extensive, and it is widely used in various fields.

Application areas: hotels, shopping malls, office buildings, clubs, villas, museums, medical care, education, catering, exhibitions, etc.

Application areas: suspended ceilings, integrated ceilings, partitions, screens, sliding doors, transparent walls, hotel furniture, office furniture, bar counters, lighting, chandeliers, signs, signs, floors, landscapes, etc.